--- 6 ---
Test conditions
Maker
Model
Working capacity (*1)
Working
time
(sec./pc.)
0
*400
100
*800
*1200
300
DS 12DVB2
HITACHI
C
6.6
90
80 (105)
6.4
1.3
1.3
5.8
5.8
0.7
0.7
DS 12DVB2
HITACHI
C
DS 12DVB2
HITACHI
C
DS 12DVB2
HITACHI
C
"High speed"
"High speed"
"High speed"
"Low speed"
80
80 (105)
205
200 (260)
500
505 (660)
200
7. WORKING PERFORMANCE PER SINGLE CHARGE
Drilling and fastening performance comparison per charge
Remark* Number of machine screws fastened per charge
Remark*1 Number of holes or fasteners per charge
The above table shows an example of test data. The batteries used in this test data are as follows:
Model DS 12DVB2 and C: 2.0 Ah
The figures in parentheses ( ) indicate the values for a 2.6-Ah battery.
As actually measured values listed in the above table may vary depending on sharpness of the drill bit, workpiece
hardness (particularly in wood materials), moisture content of wood, charging condition, operator skill, etc.
This data should be used as a comparative guide only.