K6602743
Rev.2
02.12.’02
- 3 -
To use this product safely (Continued)
z
Environmental circumstance
Although this product partially scatters electro-magnetic field into the air, it has been inspected and was
installed under Electro-magnetic regulations of resident areas, such as EMC standard EN55022
(corresponding to FCC part 15 Class B, etc.). However, anything other than this product, such as an
interface cable, is excluded. Therefore, the following cases require a system side improvement for the
electro-magnetic field regulations.
1) Disturbance of operations of other products or equipment in resident area
2) Disturbance caused by other product, such as cabling, to operations of other products or equipment.
Only Hitachi trained persons should change this product Hitachi assumes no responsibility for products
which have been changed by anyone else.
z
Safety regulations
This product meets the following safety regulations, but the system side should consider the safety of the
system with this product.
Regulations:
- UL1950 Third Edition dated July 28, 1995
- CSA C22.2 N0.950-M95
- IEC60950 A4: 1996
- EN60950 A11: 1992
Warranty and Limited Liability
This product is sold with a limited warranty and specific remedies are available to the original purchaser in
the event the product fails to conform to the limited warranty. Hitachi’s liability may be further limited in
accordance with its sales contact.
In general, Hitachi shall not be responsible for product damages caused by natural disasters, fire, static
discharge, misuse, abuse, neglect, improper handling or installation, unauthorized repair, alteration or
accident. In no event will Hitachi be liable for loss of data stored on product.
HITACHI
SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
EVEN IF INFORMED OF THE POSSIBILITY THEREOF IN ADVANCE.
Please see your sales contract for a complete statement of warranty rights, remedies and limitation of liability.
