Hitachi DH 40MR, Technical And Service Manual

Page: 35 / 36

* ALTERNATIVE PARTS
--- 6 ---
ITEM
NO.
CODE NO. DESCRIPTION REMARKS
NO.
USED
9 -- 02
DH 40MR
OPTIONAL ACCESSORIES
632 956-000 CORE BIT 38MM 1 INCLUD.633
633 956-001 GUIDE PLATE (FOR CORE BIT 38MM) 1
634 955-154 CORE BIT 45MM 1 INCLUD.635
635 955-166 GUIDE PLATE (FOR CORE BIT 45MM) 1
636 955-155 CORE BIT 54MM 1 INCLUD.637
637 955-167 GUIDE PLATE (FOR CORE BIT 54MM) 1
638 956-002 CORE BIT 64MM 1 INCLUD.639
639 956-003 GUIDE PLATE (FOR CORE BIT 64MM) 1
640 955-157 CORE BIT 79MM 1 INCLUD.641
641 955-168 GUIDE PLATE (FOR CORE BIT 79MM) 1
642 956-004 CORE BIT 94MM 1 INCLUD.643
643 956-005 GUIDE PLATE (FOR CORE BIT 94MM) 1
644 955-159 CORE BIT 105MM 1 INCLUD.645
645 955-169 GUIDE PLATE (FOR CORE BIT 105MM) 1
646 956-009 CENTER PIN (B) 147L FOR CORE BIT D32-35 1
647 955-165
CENTER PIN (A) 133L FOR CORE BIT D38-150
1
648 313-466 CORE BIT SHANK (B) SDS MAX D25-35 1
649 313-467 CORE BIT SHANK (A) SDS MAX D38-150 1
650 950-272 DRILL CHUCK 13VLA 1 INCLUD.651
651 930-515 CHUCK WRENCH 10G 1
652 313-468 CHUCK ADAPTER (SDS MAX) 1
653 313-469
CHEMICAL ANCHOR ADAPTER (SDS MAX) 12.7MM
1
654 313-470
CHEMICAL ANCHOR ADAPTER (SDS MAX)19MM
1
655 313-471 BULL POINT (SDS MAX) 280L 1
656 313-472 BULL POINT (SDS MAX) 400L 1
657 313-473 COLD CHISEL (SDS MAX) 280MM 1
658 313-474 COLD CHISEL (SDS MAX) 400MM 1
659 313-475 CUTTER (SDS MAX) W50X400L 1
660 313-476 SCOOP (SDS MAX) 400L 1
661 313-478 RAMMER (SDS MAX) 150MM X 150MM 1
662 313-477 BUSHING TOOL (SDS MAX) 1
663 313-479
SHANK (SDS MAX)FOR RAMMER,BUSHING TOOL
1
664 320-859 SYRINGE (BLOW-OUT BULB TYPE) 1
665 318-085 SYRINGE (BELLOWS TYPE) 1
666 308-471
GREASE FOR HAMMER.HAMMER DRILL (70G)
1
667 980-927
GREASE FOR HAMMER.HAMMER DRILL (500G)
1
Printed in Japan
(020930N)