5
English
Switching OFF
Disconnect the battery
Clockwise rotation
Counterclockwise rotation
Remaining battery indicator switch
The battery remaining power is nearly empty.
Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 49.
Standard accessories are subject to change without notice.
APPLICATIONS
Rotation and hammering function
○
Drilling anchor holes
○
Drilling holes in concrete
○
Drilling holes in tile
Rotation only function
○
Drilling in steel or wood
(with optional accessories)
○
Tightening machine screws, wood screws
(with optional accessories)
Hammering only function
○
Light-duty chiselling of concrete, groove digging and
edging.
Table 1
Indications of the charge indicator lamp
Charge
indicator
lamp
(RED /
BLUE /
GREEN /
PURPLE)
Before charging Blinks
(RED)
Lights for 0.5 seconds. Does not light for
0.5 seconds. (o
ff
for 0.5 seconds)
Plugged into power
source
While charging
Lights
(BLUE)
Lights continuously
Charging
complete
Lights
(GREEN)
Lights continuously
(Continuous buzzer sound: about 6 seconds)
Overheat
standby
Blinks
(RED)
Lights for 0.3 seconds. Does not light for
0.3 seconds. (o
ff
for 0.3 seconds)
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
Charging
impossible
Flickers
(PURPLE)
Lights for 0.1 seconds. Does not light for
0.1 seconds. (o
ff
for 0.1 seconds)
(Intermittent buzzer sound: about 2 seconds)
Malfunction in the battery
or the charger
NOTE
When standby for cooling battery, UC36YSL cools the overheated battery by cooling fan.
SPECIFICATIONS
The speci
fi
cations of this machine are listed in the Table on
page 49.
NOTE
Due to HITACHI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red. (At 1-second
intervals)
2. lnsert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 2
.
3. Charging
When inserting a battery in the charger, charging will
commence and the charge indicator lamp will light up
continuously in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up continuously in green.
(See
Table 1
)
●
Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in
Table 1
, according to the condition of the
charger or the battery.
0000Book̲DH36DBL.indb 5
0000Book̲DH36DBL.indb 5
2017/03/29 17:17:17
2017/03/29 17:17:17
