--- 5 ---
B. Anchor setting
Anchor setting bar to permit anchor setting operation with the hammer drill
Anchor setting bar
Anchor setting adapter (SDS-plus shank)
Anchor setting bar for manual anchor setting
Anchor setting adapter
Part name
W - 1/4 anchor setting adapter - A
W - 5/16 anchor setting adapter - A
W - 3/8 anchor setting adapter - A
W - 1/2 anchor setting adapter - A
W - 5/8 anchor setting adapter - A
Internal cone type
Code No.
Part name
Code No.
971974
971795
971796
971797
971798
971799
971800
971801
971802
971803
External cone type
+
W - 1/4 anchor setting adapter - B
W - 5/16 anchor setting adapter - B
W - 3/8 anchor setting adapter - B
W - 1/2 anchor setting adapter - B
W - 5/8 anchor setting adapter - B
C. Large hole boring (ro striking)
Center pin, core bit, core bit shank and guide plate
(Guide plate)
+
+
+
Center pin
Core bit
Core bit shank
(SDS-plus shank)
(1) Center pin (Do not use bit with outer diameter of 25 mm (31/32") and 29 mm (1-5/32").)
Center pin (A)
Center pin (B)
Core bit (outer diameter) 32, 35, 38 mm (1-1/4", 1-3/8", 1-1/2")
Core bit (outer diameter) 45, 50 mm (1-25/32", 2")
Code No. 982684
Code No. 982685
Part name
W - 1/4
anchor setting adapter - A
W - 5/16 anchor setting adapter - A
W - 3/8
anchor setting adapter - A
W - 3/8
anchor setting adapter - A
Internal cone type
Overall length
Code No.
Part name
Code No.
260
260
160
260
302976
302975
303621
302974
W - 1/4
anchor setting adapter - B
W - 5/16 anchor setting adapter - B
W - 3/8
anchor setting adapter - B
W - 3/8
anchor setting adapter - B
260
260
160
260
302979
302978
303622
302977
External cone type
Overall length
