Hitachi DH 20PB Technical Data And Service Manual Download Page 4

Page: 4 / 33

--- 1 ---

1. PRODUCT NAME

Hitachi Hammer Drill (variable speed and reversing), Model DH 20PB

2. MARKETING OBJECTIVE

The Model DH 20PB has been developed based on the Model DH 24PB inheriting the reliable striking

mechanism. Thanks to the newly provided powerful motor, the Model DH 20PB has 20-mm drilling capacity (in

concrete) and the drilling speed is far faster than the competitors. The Model DH 20PB is an excellent cost/

performance hammer drill expected to expand our market share.

3. APPLICATIONS

(1) Rotation and striking function

Drilling anchor holes

Drilling holes in concrete, tile, brick and similar materials

(2) Rotation only function

Drilling holes in steel and wood (with chuck adapter)

Tightening and loosening machine screws and wood screws (with chuck adapter)

[Typical applications]

Air conditioning

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Installation of air conditioners, water coolers and heaters, and air ducts

Piping and plumbing

• • • • • • • • • • • • • • • • • • • • • • • •

Installation of gas, water, and sanitary facilities

Electrical work

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Installation of light fixtures and various electric appliances

Interior decoration

• • • • • • • • • • • • • • • • • • • • • • • • • • •

Installation of seating, display stands, and partitions

Other civil engineering, construction and repair work

Summary of Contents for DH 20PB


































Search results

Summary of Contents for DH 20PB

Reviews:

Related manuals for DH 20PB

Brands by name

Popular brands

Hitachi DH 20PB, Technical Data And Service Manual

Search results

Summary of Contents for DH 20PB

Reviews:

Related manuals for DH 20PB

Brands by name

Popular brands