--- 17 ---
(c) Mount the Shift Arm
[12]
to the Shift Knob
[39]
by pushing the Shift Arm
[12]
in the groove of the Shift
Knob
[39]
completely with a small flat-blade screwdriver. Insert the end of the Shift Arm
[12]
into the hole
of the Gear Case
[11]
and fit it in the groove of the Slide Ring Gear
[24]
. Pay attention to the direction of
the Gear Case
[11]
. Do not mount the Shift Arm
[12]
downward. (See Fig. 9.)
Fig. 9
Fig. 8
Shift Knob
[39]
Slide Ring Gear
[24]
Shift Arm
[12]
Gear Case
[11]
Groove
(3) Mounting the Clutch Dial
[6]
to the Gear Case
[11]
The Nut
[7]
has three protrusions. One of these protrusions is wider than the others. The Clutch Dial
[6]
has
three concave portions. One of these concave portions is wider than the others. Mount the Nut
[7]
to the
Clutch Dial
[6]
aligning the wider protrusion of the Nut
[7]
with the wider concave portion of the Clutch Dial
[6]
.
(The wider concave portion in the Clutch Dial
[6]
is at the position indicated with "1" on the outside of the
Clutch Dial
[6]
.) (See Fig. 10.)
[31]
[29]
[11]
[30]
[12]
[40]
Convex
portion
Red mark