-6-
Fig. 8 • Reassembly of gear cover (A) section
Fig. 9 • Reassembly of gear cover (A) section
Reassembly can generally be conducted by reversing the disassembly procedure. However, special
attention should be given to the following items.
1. Internal wire arrangement
(1) Perform wiring of the internal wires according to Fig. 10 to Fig. 13.
(2) Be careful not to get the internal wires caught between handle covers (A) and (B).
2. Reassembly of gear cover (A) section
(1) Mount Washer (C)
[20]
to Spindle (D)
[4]
securely before mounting the Low Speed Gear
[21]
.
(2) Mount the Shift Arm
[23]
and High Speed Gear
[22]
in the specified direction as shown in Fig. 8 and
Fig. 9.
(3) Insert the Shift Pin
[15]
into the slotted hole of the Shift Arm
[23]
securely as shown in Fig. 9.
Reassembly
[22]
[4]
[5]
[7]
[6]
[21]
[14]
[24]
[23]
[11]
[12]
[20]
[10]
[15]
[23]
[22]
[24]
[4]