5
English
Switch unlock
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 164.
Standard accessories are subject to change without notice.
APPLICATIONS
○
Cutting pipe and angle steel.
○
Cutting various lumbers.
○
Cutting mild steel plates and aluminum plates.
○
Cutting synthetic resins, such as phenol resin and vinyl
chloride.
SPECIFICATIONS
Model
CR10DL
Voltage
10.8 V
No-Load Speed
0 – 2700 min
–1
Stroke
13 mm
Capacity
Mild Steel Pipe
O.D. 25 mm
Vinyl Chloride
Pipe
O.D. 45 mm
Wood
Depth 50 mm
Mild Steel Plate
Thickness 4 mm
Weight
1.2 kg
NOTE
Due to HITACHI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
2. Insert the battery into the charger. (Fig. 2)
Firmly insert the battery into the charger till it contacts the
bottom of the charger.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See
Table 1
)
●
Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1
, according to the condition of the charger or the
rechargeable battery.
Table 1
Indications of the pilot lamp
Symbol mark
Pilot lamp
(red)
Before
charging
Blinks
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (o
ff
for 0.5 seconds)
While
charging
Lights
Lights continuously
Charging
complete
Blinks
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (o
ff
for 0.5 seconds)
Overheat
standby
Blinks
Lights for 1 second. Does not light
for 0.5 seconds. (o
ff
for 0.5 seconds)
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
Charging
impossible
Flickers
Lights for 0.1 seconds. Does not light for
0.1 seconds. (o
ff
for 0.1 seconds)
Malfunction in the battery
or the charger
0000Book̲CR10DL.indb 5
0000Book̲CR10DL.indb 5
2015/02/20 14:25:14
2015/02/20 14:25:14
