3
CPX2(M1-20WL)
3. Names of each part
Projector
WARNING
►
HOT!:
Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
►
Do not look into the lens or vents while the lamp is on, since the strong light is not good
for your eyes.
►
Do not handle the elevator knobs without holding the projector, since the projector may
drop down.
CAUTION
►
Maintain normal ventilation to prevent the projector from heating up. Do not cover, block or
plug up the vents. Do not place anything that can stick or be sucked to the vents, around
the intake vents. Clean the air filter periodically.
►
Do not use the security slot to prevent the projector from falling down, since it is not designed
for it.
►
Use the shutdown switch only when the projector is not turned off by normal procedure, since
pushing this switch stops operation of the projector without cooling it down.
The lamp unit is inside.
(10) Intake vents
The air
fi
lter and intake vent are
inside.
(13) Exhaust vents
HOT!
SD C
ARD
K
COMPUTER IN
USB
USB STORAGE
DC 5V 0.5A
AUDIO OUT
AUDIO IN
S-VIDEO
VIDEO
LAN
HOT!
(1)
(2) (3)
(4)
(7)
(10)
(9) (8) (11)
(6)
(7)
(5)
(13)
(14)
(21) (16) (17) (22) (18) (19) (20) (23) (24)
(15)
(Bottom)
(12)
(24) AUDIO IN port
(23) AUDIO OUT port
(21) Security slot
(18) COMPUTER IN port
(14) AC inlet
(22) Shutdown switch
(20) S-VIDEO port
(17) USB port
(19) VIDEO port
(16) USB STORAGE port
(9) Lens cover
(12) Speaker
(15) LAN port
(11) Filter cover
(8) Lens
(1) Lamp cover
(7) Elevator feet (x 2)
(2) Focus ring
(6) Elevator knobs (x 2)
(3) Zoom ring
(5) SD card slot cover
(4) Control panel
