Hitachi CP-X940E, Service Manual

Page: 5 / 51

– 5 –
Remote C ontrol T ransmitter
•
The laser pointer on the remote control unit radiates the laser beam from the laser aperture.
•
This laser pointer used as a stick (for indication).
∑
Do not stare directly into the laser aperture or radiate the laser beam to other persons as the laser emitted
is a class 2 laser and it could damage you vision , etc.
Especially pay attention if children are present.
•
The three labels below are caution labels for the laser beam.
LASER APERTURE
CAUTION
LASER RADIATION -
DO NOT STARE INTO BEAM
WAVE LEGTH : 670nm
MAX. OUTPUT : 1mW
CLASS 2 LASER PRODUCT
RADIAZIONI LASER
NON GUARDARE NEL RAGGIO LUCE
APPARECCHIO LASER DI CLASS 2
RAYONNEMENT LASER MANUFACTURED
NE PAS REGARDER DANS
LE FAISCEAU APPAREIL August-97
A LASER DE CLASSE 2
LASER-STRAHLUNG
NICHT IN DEN STRAHL
BLICKEN LASAER KLASSE 2 MANUFACTURER
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
Caution
Cautions on use of the laser pointer.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
WAVE LENGTH : 670nm
MAX. OUTPUT : 1mW
IEC60825-1 : 1993 + A1 : 1997
MUTE button
Silences the sound. (Cancels the mute when
the unit is set in mute mode.)
VOLUME button
Adjusts volume. The sound is loud or low
while pressing the "+" or "-" button.
LASER button
Laser pointer ON button. Use as a stick (for
indication).
MOUSE LEFT button
Mouse left button is the left click of the
mouse. (bottom button)
RESET / RIGHT button
When displays the on-screen menus, resets
the menu item to factory settings.
When operates the mouse emulation, works
as right click of mouse in computer mode.
After moving the picture (POSITION ON),
resets the position to factory settings.
MOUSE ON button
Mouse emulation mode starts.
When menu are open or blank screen is
displayed or icon of position is displayed,
there are stopped and back light off.
TIMER ON / OFF button
Displays the setting time by count down.
STANDBY / ON button
Power ON/OFF button.
OFF sets the unit in standby mode.
FREEZE Button
Pressing this button displays a still picture
(by freezing).
MAGNIFY button
Pressing this button partially magnifies a
displayed picture.
POSITION button
Moves the picture by DISK PAD after
pressed the POSITION ON button.
(Only RGB signal input)
While the back light on, you can operate
POSITION.
DISK PAD
When the back light of MENU ON button
on, selects or adjusts the menu item.
When removes the on-screen menus,
works as mouse.
When the back light of the POSITION ON
button on, moves picture.
MENU ON button
Displays the on-screen menus.
And back light on.
While the back light on, you can operate
MENU.
BLANK ON button
The blank screen which is displayed by
pressing BLANK.
And the blank screen will be revealed
down by pressing BLANK again.
INPUT SELECT button
Selects the input source.
2
1
3
2
1
STANDBY/ON MUTE
POSITION ON
OFF
FREEZE
LASER
RESET
MOUSE ON
BLANK TIMER
RGB VIDEO
INPUT
MENU ON
RIGHT
VOLUME MAGNIFY