Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are required.
(
36
)
7) Click
[Security Settings]
on the main menu.
8) Click
[Network Control]
and enter the desired authentication password. * See
NOTE1.
9) Click the
[Apply]
button to save the settings. * See NOTE2.
• The Authentication Password will be the same for
[Network Control
Port1 (Port: 23)]
,
[Network Control Port2 (Port: 9715)]
, and
[Image Transfer
Port (Port: 9716)]
.
NOTE1
• The new configuration settings are activated after restarting the
network. Restart the network when any configuration settings are changed.
The network connection can be restarted using
[Network Restart]
on the main
menu.
NOTE2
4. Utilize projector – Advanced -
Summary of Contents for CP-X608
Page 4: ... ...
