Hitachi CP-X608 Page 67 User Manual Download

Page: 67 / 83

Playlist is a DOS format text file, which decides the order of displayed still image

files or moving image files in the thumbnail or the slide show.

Playlist file name is [imagelistdir.txt]. It is created in each folder when “PC-LESS

Presentation” is displayed. The timing of playlist creation is when “PC-LESS

Presentation” is displayed in the directory, which any playlist file does not exist.

The playlist is created in the displayed directory.

4.3 Playlist

• Playlist can not be overwritten. Once it is created, data remains.

Therefore, the image can not displayed if it is additionally saved to the memory

card that is on the playlist. In order to see added picture file, delete playlist.

NOTE

Playlist is editable on the PC. Display time and rotation information at the slide

show can be set based on specifying settings. Of course it is possible to make

certain file image undisplayable in a playlist deleting 1 line relating to the file from

playlist. Also, it is possible to see added picture image based on adding picture

image file name and pass name of destination to save in playlist.

[Example of adding image file] (Pass name/pass name/…/file name, display

time, rotation information)

images/photo1/img001.jpg

images/photo1/img002.jpg, 2000

images/photo1/img003.jpg, 500, rot1

images/photo1/img004.jpg

images/photo1/img005.jpg, 500, rot2

The number after the extension is the slide show display time. It can be set

between 0 and 999900. (ms) Least input increment is 100 ms. The end of display

time means rotation information. 90 degrees clockwise rotation becomes rot1, rot2

and rot3. (When no rotation, not specify or specify rot0.)

Display time and rotation information should be used “,” for separation.

• Maximum characters for the playlist in 1 line at playlist is 1024

including linefeed. If it exceeds, playlist becomes invalid and error.

• Playlist maximum size is 64kB. If it exceeds, it becomes invalid.

• Playlist can register up to 999 image files. If it exceeds, first 999 files can be

utilized.

• When image file is added to the memory card and be able to see on the screen,

delete existing playlist in the memory card.

Caution

4. Utilize projector – Advanced -

Summary of Contents for CP-X608




















































































Search results

Summary of Contents for CP-X608

Reviews:

Related manuals for CP-X608

Brands by name

Popular brands

Hitachi CP-X608, User Manual

Search results

Summary of Contents for CP-X608

Reviews:

Related manuals for CP-X608

Brands by name

Popular brands