Hitachi CP-X443 series User Manual – Operating Manual Download

Page: 2 / 55

About this manual . . . . . . . . . .  1
Contents . . . . . . . . . . . . . . . . .  2
Projector features . . . . . . . . . .  3
Preparations . . . . . . . . . . . . . .  3

About contents of package . . . . . . . 3

Fastening the lens cap . . . . . . . . . . 3

Part names . . . . . . . . . . . . . . . 4

Projector . . . . . . . . . . . . . . . . . . . . . 4

Control buttons . . . . . . . . . . . . . . . . 5

Remote control . . . . . . . . . . . . . . . . 5

Setting up . . . . . . . . . . . . . . . . 6

Arrangement . . . . . . . . . . . . . . . . . . 7

Adjusting the projector's elevator . . 8

About the ﬁ lter cover for bottom-up use . . 9

Connecting your devices . . . . . . . . 10

Connecting power supply . . . . . . . 13

Remote control . . . . . . . . . . . 14

Laser pointer . . . . . . . . . . . . . . . . .

Laser pointer

Putting batteries . . . . . . . . . . . . . . 14

Using the remote control . . . . . . . . 15

Power on/off . . . . . . . . . . . . . 16

Turning on the power . . . . . . . . . . .

Turning on the power

Turning off the power . . . . . . . . . . .

Turning off the power

Operating . . . . . . . . . . . . . . . 17

Adjusting the volume . . . . . . . . . . . 17

Temporarily muting the sound . . . . 17

Selecting an input signal . . . . . . . . 17

Adjusting screen with ONE-TOUCH . . 18

Selecting an aspect ratio . . . . . . . . 18

Adjusting the zoom and focus . . . . 18

Using the automatic adjustment feature . 19

Adjusting the position . . . . . . . . . . 19

Correcting the keystone distortions 20

Using the magnify feature . . . . . . . 20

Freezing the screen . . . . . . . . . . . . 21

Temporarily blanking the screen . . 21

Operating the computer screen . . . 22

Multifunctional settings . . . . 23

Using the menu function . . . . . . . . 23

Contents

EASY Menu . . . . . . . . . . . . . . . . . . 24

Aspect, Mode, Bright, Contrast, Color,

Tint, Sharpness, Whisper, Mirror, Reset,

Filter time, Language, Go to advanced

PICTURE Menu . . . . . . . . . . . . . . . 26

Bright, Contrast, Gamma, Color temp,

Color, Tint, Sharpness, My memory

IMAGE Menu . . . . . . . . . . . . . . . . . 29

Aspect, Over scan, V. position, H. phase,

H. position, H. size, Auto adjust execute

VIDEO Qlty. Menu . . . . . . . . . . . . . 31

Progressive, 3D-YCS, Video NR

INPUT Menu . . . . . . . . . . . . . . . . . 32

Color space, Component, Video format,

DVI, Information

SETUP Menu . . . . . . . . . . . . . . . . . 34

Whisper, Mirror, Volume, Stereo, IR remote

SCREEN Menu . . . . . . . . . . . . . . . 35

Language, Menu position, OSD bright,

Blank, Start up, MyScreen,

MyScreen lock, Message

OPTION Menu . . . . . . . . . . . . . . . . 38

One touch, Auto

search, Auto off, Lamp

time, Filter time, Service

NETWORK Menu . . . . . . . . . . . . . 40

DHCP, IP address, Subnet mask, Default

gateway, Information

Maintenance . . . . . . . . . . . . . 44

Lamp . . . . . . . . . . . . . . . . . . . . . . . 44

Air ﬁ lter . . . . . . . . . . . . . . . . . . . . . 46

Other care . . . . . . . . . . . . . . . . . . . 47

Troubleshooting . . . . . . . . . . 48

Regarding the indicator lamps . . . . 50

Phenomena that may easily be

mistaken for machine defects . . . . 52

Warranty and after-service . . . 54
Speciﬁ cations . . . . . . . . . . . . 54



Technical (English only)

(Please see the end of this book, although only in English.)

Summary of Contents for CP-X443 series
























































Search results

Summary of Contents for CP-X443 series

Reviews:

Related manuals for CP-X443 series

Brands by name

Popular brands

Hitachi CP-X443 series, User Manual – Operating Manual

Search results

Summary of Contents for CP-X443 series

Reviews:

Related manuals for CP-X443 series

Brands by name

Popular brands