Hitachi CP-X265 Page 64 User Manual – Operating Manual Download

Page: 64 / 66

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

Pictures appear

dark.

The brightness and/or contrast are adjusted to an

extremely low level.

Adjust BRIGHTNESS and/or CONTRAST settings to a

higher level using the menu function.

5, 6

The WHISPER function is working.

Select NORMAL for the WHISPER item in the SETUP

menu.

6, 35

The lamp is approaching the end of its product

lifetime.

Replace the lamp.

53, 54

Pictures appear

blurry.

Either the focus and/or horizontal phase settings are

not properly adjusted.

Adjust the focus using the focus ring, and/or H PHASE

using the menu function.

9, 30

The lens is dirty or misty.

Clean the lens referring to the section “Caring for the lens”.

Troubleshooting

NOTE

• Although bright spots or dark spots may appear on the screen, this

is a unique characteristic of liquid crystal displays, and it does not constitute or

imply a machine defect.

Summary of Contents for CP-X265



































































Search results

Summary of Contents for CP-X265

Reviews:

Related manuals for CP-X265

Brands by name

Popular brands

Hitachi CP-X265, User Manual – Operating Manual

Search results

Summary of Contents for CP-X265

Reviews:

Related manuals for CP-X265

Brands by name

Popular brands