Hitachi CP-X265 User Manual – Operating Manual Download

Page: 54 / 66

RGB IN2

RGB OUT

CONTRO

AUDIO IN

CB/P

CR/P

AUDIO IN

LAN

AUDIO O

USB

S-VIDEO

CR/P

CB/P

AUDIO IN

RGB IN

LAN

CONT

ROL

RGB OU

AUDIO OU

USB

VIDEO
S-VI

DEO

AC IN

Lamp (continued)

A lamp has a finite product life. Using the lamp for long periods of time could

cause the pictures darker or the color tone poor. Note that each lamp has a

different lifetime, and some may burst or burn out soon after you start using them.

Preparation of a new lamp and early replacement are recommended.

To prepare a new lamp, contact your dealer and tell the lamp type number.

Type number = DT00751.

Turn the projector off, and unplug the power cord. Allow the lamp to cool for

at least 45 minutes.

Prepare a new lamp.

If the projector is mounted on the ceiling, or if the lamp has broken, also ask

the dealer to replace the lamp.

In the case of replacement by yourself,

Loosen the lamp cover screw (marked by arrow)

and then slide the lamp cover to the side to

remove it.

Loosen the screws (marked by arrow) of the

lamp, and slowly pick up the lamp by the handles.

Insert the new lamp, and retighten firmly the two

screws that are loosened in the previous process

to lock it in place.

Slide the lamp cover back in place and firmly

fasten the lamp cover a screw.

Turn the projector on and reset the lamp time

using the LAMP TIME function in the OPTION

(



)

() Press the MENU button to display a menu. Only

when the EASY MENU has appeared, please

perform the next step ().

() Point at the “Go to Advanced Menu …” in the menu

using ▼/▲ button, then press the ► button.

(3) Point at the “OPTION” in the left column of the

menu using ▼/▲ button, then press the ► button.

(4) Point at the ”LAMP TIME” using ▼/▲ button, then

press the ► button. A dialog will appear.

(5) Press the ▲ button to select “RESET” on the

dialog. It performs resetting the lamp time.

Maintenance

Lamp cover

Screw

Handle

Screws

NOTE

• Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

Summary of Contents for CP-X265



































































Search results

Summary of Contents for CP-X265

Reviews:

Related manuals for CP-X265

Brands by name

Popular brands

Hitachi CP-X265, User Manual – Operating Manual

Search results

Summary of Contents for CP-X265

Reviews:

Related manuals for CP-X265

Brands by name

Popular brands