Hitachi CP-X1200 Series Page 56 User Manual Download | Manualshive

Page: 56 / 78

background image

41

T

T

roubleshooting

roubleshooting

Related Messages

When the unit's power is on, messages such as those shown below may be displayed.
When any such message is displayed on the screen, please respond as described below.
If the same message is displayed after the treatment, or if a message other than the
following appears, please contact your dealer or service company.

memo

Although these messages will be automatically disappeared around several

minutes, it will be reappeared every time the power is turned on.

• A lamp has a finite product life. Lamps are characterized by the fact that,

after long hours of usage, a lamp will no longer light up, or the lamp will break or burst,
etc. This projector is equipped with an automatic shut-down function, such that the
power will automatically be turned off when lamp usage time has reached 2000 hours.
Please be aware, however, that among lamp types, there are major differences in
product lifetimes; a lamp may thus fail to light even prior to the functioning of the
automatic shut-down function of this projector.

NOTE

(This table is continued to the following page.)

Message

Description

CHANGE THE LAMP

AFTER REPLACING LAMP,

RESET THE LAMP TIMER.

The time the lamp timer has counted is approaching
2000 hours.

Preparation of a new lamp, and an early lamp change is
recommended. After you have change the lamp, please be sure
to reset the lamp timer.

CHANGE THE LAMP

AFTER REPLACING LAMP,

RESET THE LAMP TIMER.

THE POWER WILL TURN OFF

AFTER ** hr.

The time the lamp timer has counted is approaching
2000 hours, so a lamp change within

**

hours is

recommended.

When lamp usage reaches 2000 hours, the power will
automatically be turned off.
Please change the lamp by referring to the section “Lamp”.
After you have changed the lamp, please be sure to reset the
lamp timer.

CHANGE THE LAMP

AFTER REPLACING LAMP,

RESET THE LAMP TIMER.

THE POWER WILL TURN OFF

AFTER 0 hr.

As the time the lamp timer has counted has reached
2000 hours, the power will soon be automatically
turned off.

Please immediately turn the power off, and change the lamp by
referring to the section “Lamp”. After changing the lamp, please
be sure to reset the lamp timer.

01CP-X1200-ENG-OG-三校 03.12.5 1:10 PM ページ41

«
...
54
55
56
57
58
...
»

Summary of Contents for CP-X1200 Series















































































Reviews:

No comments

Related manuals for CP-X1200 Series

Brand: JBL Pages: 43

Brand: IBM Pages: 94

Advantage Manual With CSR

Brand: Da-Lite Pages: 6

Deltaco ARM-0412

Brand: Nordic Pages: 12

Brand: Barco Pages: 2

Brand: LA VAGUE Pages: 68

Paramount PC930 Series

Brand: PEERLESS Pages: 3

Brand: Lampo Pages: 2

Brand: Miroir Pages: 36

Brand: Tripp Lite Pages: 3

Brand: Epson Pages: 11

5350 - EMP SVGA LCD Projector

Brand: Epson Pages: 2

Brand: Epson Pages: 52

5000XB - PowerLite SVGA LCD Projector

Brand: Epson Pages: 124

5510 - EMP 7250 XGA LCD Projector

Brand: Epson Pages: 128

5550C - PowerLite SVGA LCD Projector

Brand: Epson Pages: 178

5350 - EMP SVGA LCD Projector

Brand: Epson Pages: 182

Dreamio EMP-TW10

Brand: Epson Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands