Hitachi CP-WX9210 Network Manual Download Page 30

Page: 30 / 109

Item

Description

NETWORK
INFORMATION

Selecting this item displays the dialog for viewing the wireless

and wired LAN settings. Use the

▲

▼

buttons to switch the page.

The

rst page shows the wireless LAN settings. The second page

is for the wired LAN settings, and the third page is for common

setting item.

WIRELESS
INFORMATION

The following information is displayed.

䡡㻌

PASSCODE

䡡㻌

MODE

䡡㻌

IP ADDRESS

䡡㻌

SUBNET MASK

䡡㻌

DEFAULT GATEWAY

䡡㻌

DNS SERVER

䡡㻌

MAC ADDRESS

䡡㻌

SSID

䡡㻌

ENCRYPTION

䡡㻌

SPEED

Passcord supports the connection between the

projector and the computer when using Network

Presentation. Refer to Network Presentation (



)

for the details.

(continued on next page)

2. Connection to the network

• IP ADDRESS, SUBNET MASK and

DEFAULT GATEWAY indicate “0.0.0.0” in the

following condition.

(1) The USB wireless adapter is not inserted

into the projector.

(2) DHCP is ON and the projector does not get
address from DHCP server.
• Nothing (blank) is shown in the CH and SPEED

elds if the USB wireless adapter is not inserted.

NOTE

Summary of Contents for CP-WX9210














































































































Search results

Summary of Contents for CP-WX9210

Reviews:

Related manuals for CP-WX9210

Brands by name

Popular brands

Hitachi CP-WX9210, Network Manual

Search results

Summary of Contents for CP-WX9210

Reviews:

Related manuals for CP-WX9210

Brands by name

Popular brands