16
2.4.2 Connection in Infrastructure Mode
Set the following when connecting the projector and the computer in Infrastructure
mode.
[Restriction on plugging and unplugging the USB wireless adapter]
Before you insert or pull out the USB wireless adapter from the projector, turn off
the power of the projector and pull out the power cord’s plug from the outlet. Do
not touch the USB wireless adapter that is connected to the projector while the
projector is receiving AC power.
Do not use any extension cable or device when connecting the adapter to the
projector.
1) Attach the USB wireless adapter to the WIRELESS port of the projector.
2) Turn on the projector.
3) Press the MENU button on the remote control or the
control panel of the projector.
The MENU you last used will appear.
Use the cursor button to select the following.
EASY MENU > ADVANCED MENU > NETWORK > WIRELESS SETUP
4) Set the following items in WIRELESS SETUP.
䡡㻌
MODE: INFRASTRUCTURE
䡡㻌㻌
DHCP
䡡㻌
IP ADDRESS
䡡㻌
SUBNET MASK
䡡㻌
DEFAULT GATEWAY
䡡㻌
DNS SERVER
䡡㻌
SSID
䡡㻌
ENCRYPTION
䡡㻌
CH
As for setting an IP address, refer to “About IP address”. (
13
)
Select APPLY, then press the ENTER button to re
fl
ect the settings.
2. Connection to the network
