Hitachi CP-SX12000 User Manual Download Page 112

Page: 112 / 172

3. Management with Web browser software

3.1 Conﬁ guring and controlling the projector via a web browser (continued)

3.1.9 Security Settings

Displays and conﬁ gures passwords and other security settings.

Item

Description

Administrator authority

Conﬁ gures the Administrator ID and password.

Administrator ID

Conﬁ gures the Administrator ID.
The length of the text can be up to 32 alphanumeric
characters.

Administrator
Password

Conﬁ gures the Administrator password.
The length of the text can be up to 255 alphanumeric
characters.

Re-enter
Administrator
Password

Reenter the above password for veriﬁ cation.

User authority

Conﬁ gures the User ID and password.

User ID

Conﬁ gures the User ID.
The length of the text can be up to 32 alphanumeric
characters.

User Password

Conﬁ gures the User password.
The length of the text can be up to 255 alphanumeric
characters.

Re-enter User
Password

Reenter the above password for veriﬁ cation.

Summary of Contents for CP-SX12000













































































































































































Search results

Summary of Contents for CP-SX12000

Reviews:

Related manuals for CP-SX12000

Brands by name

Popular brands

Hitachi CP-SX12000, User Manual

Search results

Summary of Contents for CP-SX12000

Reviews:

Related manuals for CP-SX12000

Brands by name

Popular brands