6
Supported signals
Supported signals for SDI/DIGITAL1
Resolution (H x V)
Signal mode
H. frequency
(kHz)
V. frequency
(Hz)
Rating
720 x 480i
480i
15.7
60
SMPTE
720 x 576i
576i
15.6
50
SMPTE
1280 x 720p
720p (50Hz)
37.5
50
SMPTE
720p (60Hz)
45
60
SMPTE
1920 x 1080i
1080i (50Hz)
28.1
50
SMPTE
1080i (60Hz)
33.8
60
SMPTE
1920 x 1080sf
1080i (25Hz)
28.1
50
SMPTE
1080i (30Hz)
33.8
60
SMPTE
1920 x 1080p
1080p (50Hz)
56.3
50
SMPTE
1080p (60Hz)
67.5
60
SMPTE
Only support 3G-SDI Level-A signal.
NOTE
• Be sure to check jack type, signal level, timing and resolution before connecting
this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes is not
possible with this projector.
• Depending on the input signal, full-size display may not be possible in some cases. Refer to the
number of display pixels above.
• The signal is converted to the projector’s panel resolution before being displayed. The best
display performance is achieved if the resolutions of the input signal and projector panel are
identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite sync or a
sync on G.
• The illustrations in this manual are for illustrative purposes. They may differ slightly from
your projector.
