11
ENGLISH
Remote Control
l
Handling the Remote Control
Use the remote control within about 5m from the front of the unit’s
remote-control sensor and within 30 degrees on both sides.
1. Open the battery cover.
Slide back and remove the battery
cover in the direction of the arrow.
2. Load batteries.
Load two Size AAA batteries included observing the Polarities
.
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back
into place.
With in 30
degrees
With in 30
degrees
About 3m
About 3m
About 5m
CAUTION
z
Do not use new and old batteries together. The batteries could explode or
leak, resulting in fires, physical injury, or stains.
z
When loading batteries, observe their correct polarities as marked on the
product. If loaded in the wrong direction, the batteries could explode or
leak, resulting in fires, physical injury, or stains.
ATTENTION
z
Do not drop or impact the remote control..
z
Do not splash the remote control with water or put it on a wet object.
z
Before leaving the remote control out of use for an extended period of
time, remove the batteries from it.
z
If the remote control begins to lack responsiveness, replace the
batteries.
z
Strong light, such as direct sunlight, shining on the photoreceptor of
the remote control can cause operational failure.Position this unit to
avoid direct contact with such light.
POWER ON button
16
OK button
19
AUTO button
18
PIP button
25
16
POWER OFF button
16
POWER ON/OFF
b tt
17
AV1 button
17
VOLUME UP/DOWN buttons
17
AV4 button
19
RETURN button
18
RECALL button
17
SIZE button
HDMI button
17
AV2 button
17
AV3 button
17
19
SELECT/OK buttons
RGB button
17
MENU button
19
17
MUTE button
Loading Batteries
Handing the Remote Control
