It is recommended that, when inputting a computer signal to the main
unit to get a grasp of the overall image, the DISPLAY AREA of a 1024 x
768 VESA display at 75Hz be set to FULL with SCAN set to INT.
Flicker can occur when a personal computer signal is input.If the vertical
frequency is less than 75Hz, it is recommended that the vertical frequency
be increased (upper limit: 75Hz).
12
ENGLISH
OPERATING INSTRUCTIONS (continued)
On-Screen Display System, EasyMenu
Press the SELECT button of the main unit (
or
key of the remote control) to select an
item by moving the pink text
.
Press the VOLUME button and the
and
keys of the main unit (
or
key of the
remote control) to adjust or set the selected
item, or to switch the menu.
When a choice is followed by “:”, it indicates that the
choice can be adjusted or changed.
When a choice is followed by
, a menu can be opened
by pressing the remote-controller SELECT button
or
the set SELECT button and VOLUME button
.
When [RETURN] is selected, press the remote-
controller button SELECT
or the set SELECT
button and VOLUME button
to exit to the original
menu
For information on adjusting and setting
choices, see to .
PICTURE
SOUND
DISPLAY
FUNCTION
MAIN MENU
MENU
SELECT
Remote
controller
CONTRAST
:117
BRIGHTNESS
:
0
OPTIONS
RETURN
PICTURE MENU
Pink
Pink when brightness
is selected
Guidance
Press the MENU button once again to exit the adjustment menu.
The adjustment menu will close automatically when no keys are entered for 10 seconds.
13
16
Press the MENU button to open an adjustment menu allowing you to complete various
adjustments and settings using the SELECT buttons (The
,
,
, and
keys of the
remote control or the SELECT or VOLUME button of the main unit.).
HINTS
Burn-in (residual image) can occur if the same image is displayed for an
extended time. To reduce this possibility, change the display contents at
suitable intervals.
If special images created on a PC or any other equipment (such as those
composed of a checker-flag pattern) are displayed across the screen, the
hue may be varied depending on the contrast or brightness setting.
Set unit
MENU
SELECT
VOLUME
Menu selection mark
14
Useful
knowledge
