background image

19

ENGLISH

Displays by Selecting the DISPLAY SIZE (Video input)

When you want to

Set the display

size to

Input signal

(4:3 signal)

Display screen

Remarks

Play a 4:3 image in a

16:9 screen faithfully.

4:3

Blanking occurs on both
sides.

Play a 4:3 image in a 16:9
screen with the height and
width of the middle of the
screen enlarged on equal
scales and with both sides
appearing somewhat
enlarged.

PANOR.

(Panoramic)

The 16:9 VISTA size
image in the 4:3 image
is faithfully reproduced
on the 16:9 screen.

MOVIE1

The 4:3 image is
called a letterbox
image.
In some cases, some
slight blanking may
remain at the top and
bottom.

The 21:9 Cinema size
image in the 4:3 image
is expanded vertically
on the 16:9 screen.

MOVIE2

Play a 4:3 image

faithfully in a 16:9

screen in the standard

vertical size and

horizontally squeezed.

*

FULL

*

An image with an
aspect ratio of 16:9
shrunk horizontally to
4:3 to display in a 4:3
screen

HINTS

Using a wide-screen monitor

This monitor has a screen mode selection feature.  If an incompatible
screen mode is selected to play certain software, such as a TV program,
the image would appear different from the original.  Take this into
consideration when making screen mode choices.

Use of this monitor in its enlarged display mode with the wide feature
enabled in coffee shops, hotels and other establishments for commercial or
pubic viewing purposes could infringe on the copyright holder’s right
protected by Copyright Law.
When a normal 4:3 image is displayed over the entire screen in the
PANOR. mode, not the Wide mode, parts of the periphery of the image
may disappear and/or appear distorted in some cases. Use the 4:3 mode to
view images, according to the manufacturer’s concept.

In some cases, some
slight blanking may
remain at the top and
bottom.

Summary of Contents for CMP402HDU




































Reviews: