Hitachi CML176SXW, Service Manual

Page: 6 / 59

2.2 LCD monitor General specification
Panel Type :
17 “ active matrix color TFT LCD
HT17E13-100-110
Display size :
337.92mm (H) x 270.336mm (V)
Display mode :
VGA 720 X 400 (70Hz)
VGA 640 X 480 (60/66/70/72/75Hz)
SVGA 800 X 600 (60/70/72/75Hz)
XGA 1024 X 768 (60/70/75Hz)
SXGA 1280 X 1024 (60/75Hz) standard resolution
Pixel pitch :
0.264mm(H) x 0.264mm(V)
Display Dot :
1280 x (RGB) x 1024
Contrast ratio:
θ
= 0˚
450:1 (Typ)
Brightness:
300 (Typ)
Response time ( Tr /Tf) :
16ms
Display color :
16.2M (6 bit color + FRC)
Viewing angle:
CR>10 L / R : 75/75 (Typ)
U / D : 65/65 (Typ)
Luminance Uniformity :
> 75% (minimum)
Pc interface:
1). Video : RGB analog 0.7V peak to peak
Sync : TTL positive or negative
2). Digital TMDS
Signal connector :
15 pin Mini D type, (standard VGA video)
DVI-D connector
3.5mm stereo audio jack (Audio) (EP877)
3.5mm miniature stereo Headphone jack (EP877)
Audio power :
1Wrms + 1Wrms ( 300Hz – 20kHz (S.P.L. – 10 dB))(EP877)
Front control :
power on/off with LED select adjustment (+,-)
Interface frequency
Horizontal Frequency
24KHz -- 80KHz
Vertical Frequency
<75Hz Typ : 60Hz
Plug & Play :
Support VESA DDC2B functions
Power Input voltage :
Single phase, 50/60HZ, 100VAC to 240VAC
±
10%
Total output power :
48 Watt max.
6