--- 17 ---
(8) Install Handle (A) [1] and Handle (B) [8] so that their pawls (two on Handle (A), one on Handle (B)) are
properly inserted into the grooves provided on the Gear Cover [51] (Fig. 18).
Fig. 18
(7) After confirming that the Packing [40] and the Rubber
Cushion [37] are properly installed, fit the Upper
Cover [33] to the Gear Cover [51] so that the
Connecting Piece [41] properly enters the Connector
[39] (Fig. 17).
Fig. 17
Plunger [58A]
Rubber
Cushion [37]
Upper Cover [33]
Connector [39]
Connecting Piece [41]
Pawl
Pawls
Grooves
