Hitachi C32W460N, User Manual

Page: 10 / 18

ENGLISH - 9 -
Or you can directly change the volume settings using “ VOL+ ”
(to increase) or “ -VOL ” (to decrease) button.
Setting Balance
It allows adjusting the distribution between the left and right
speakers.
• Using “ “ or “ ” button select Balance.
• Press “ ” button to change balance rightward.
• Press “ ” button to change balance leftward.
When balance control is in mid position, the cursor is displayed
with the two reciprocal arrows.
Selecting Mode
• Using “ “ or “ ” button select Mode.
• Press “ ” or “ ” button to change Mode.
You can choose
MONO , STEREO or DUAL (I-II) mode, only if
the selected channel supports that mode.
You can also change sound mode directly pressing “
I-II ” button
on your remote control.
In case of bilingual broadcast (Dual Sound), you can select
original or dubbed language using mode option.
Setting AVL
Automatic Volume Limiting (AVL) function normalises sound to
obtain fixed output level between programs, having different
sound levels. Pressing “ ” or “ ” button will turn on and off this
feature.
Setting Effect
You can use this feature to switch the sound effect on and off.
Pressing “ ” or “ ” button will turn on and off this feature. If the
current sound system is MONO and the sound effect is set ON ,
then the sound will be heard as if it is STEREO . If the current
sound system is STEREO , switching this effect on will make the
sound deeper. Switching it off will make no change in MONO
and STEREO .
Equalizer
To enter Equalizer sub-menu, select Equalizer using “ “ or “ ”
button, then enter Equalizer menu pressing “ ” or “ ” button.
In MODE item there are five predefined and one user defined
options. These are USER, CLASSIC, JAZZ, ROCK, POP and
FLAT . The predefined options can not be changed by the user.
If you change one of the frequency values of the predefined
options, the MODE is switched automatically to USER option.
The USER option may be adjusted by the user.
The 5 items below the MODE are available to adjust the sound
settings in 5 frequency values: 120 Hz, 500 Hz, 1.5 kHz, 5 kHz
and 10 kHz. To change the values of 5 frequency options, se-
lect one of the options by “ “ or “ ” button, and then press “ ”
to increase the value, or “ ” to decrease the value. In mid
position, cursor is displayed with the two reciprocal arrows.
To store the Equalizer settings, press “ ” or “ ” button on
“ STORE ” option.
During the store process all the items are stored, moreover, the
USER mode information would not be lost. In other words, when
the user mode is selected again, after storing the MODE with
one of the predefined options, the user definde frequency val-
ues would be set.
To Change Headphone Sound Settings
Pressing “ ” or “ ” button on HEADPHONE , enter the Head-
phone menu. This is a sub-menu of Sound menu, and all op-
tions in this menu are working as the same in the Sound menu.