Hitachi C 10FCB Page 18 Technical Data And Service Manualice Manual Download

Page: 18 / 36

--- 16 ---

1. Remove the Brush Cap [64] and the Carbon Brush [63].

2. Remove the four Machine Screws (W/Washers) M5 x 45 (Black). Then the Housing Ass'y can be removed

together with the Handle Cover [70] from the Gear Case [85]. Then the Armature Ass'y [71] and the Lock

Lever [76] can be removed.

3. Remove the screws from the Gear Case [85].

4. Remove the four Tapping Screws (W/Flange) D4 x 20 (Black) [83] to remove the Handle Cover [70].

5. Remove the internal wires from the Switch [80]. Remove two Tapping Screws (W/Flange) D4 x 20 (Black) to

remove the Cord [54], Cord Armor D10.7 [55] and Cord Clip [65].

6. Remove two Tapping Screws (W/SP. Washer) D5 x 65 to remove the Brush Terminal [68] from the Brush

Holder [62]. Gently tap the surface of the Housing Ass'y [60] where the Gear Case [85] was mounted with a

plastic hammer to remove the Stator Ass'y [67].

Fig. 17

C. Armature ass'y

Cord, stator ass'y and housing ass'y

Tools required:

• Phillips screwdriver

• Flat-blade screwdriver

• Plastic hammer

Summary of Contents for C 10FCB





































Search results

Summary of Contents for C 10FCB

Reviews:

Related manuals for C 10FCB

Brands by name

Popular brands

Hitachi C 10FCB, Technical Data And Service Manualice Manual

Search results

Summary of Contents for C 10FCB

Reviews:

Related manuals for C 10FCB

Brands by name

Popular brands