Hitachi BZ-1 Manual Download Page 137

Page: 137 / 283

1.2 Installing the “LiveViewer”

The “LiveViewer” software needs to be installed on all the computers to connect
to the projector through a network.

You need to log in as an administrator user to install the software.

1) Turn on the computer.
2) Shut down all applications.
3) Insert the bundled “Wireless and Network Software” CD-ROM into the

computer's CD-ROM drive.

• If the Choose Setup Language dialog doesn't appear, proceed as follows:

(1) Click on the

[Start]

button on the toolbar and select the “Run”.

(2) Enter E:\setup.exe and then press the

[OK]

NOTE

If your CD-ROM drive is not drive E on your computer, you will need to
replace E with the correct drive letter assigned to your CD-ROM drive.

If the software has been already installed, Uninstallation will be done. Click
the

[Cancel]

button, then uninstallation will be canceled. If you uninstalled the

software by miss-operation, please re-install the software from ﬁrst procedure.

5) After a moment, the Welcome dialog will appear

as shown on the right. Press the

[Next]

• After sequence 3), the User Account Control (UAC) dialog will appear

(if you are using Windows Vista

or Windows

7). Please click the

[Allow]

continue installation.

NOTE

4) After a moment, the Choose Setup Language

dialog will appear as shown on the right. Select
what you like to use in the list, and click the

[OK]

1. Connection to the network

1.2.1 Installing the “LiveViewer”

Summary of Contents for BZ-1




























































































































































































































































































Search results

Summary of Contents for BZ-1

Reviews:

Related manuals for BZ-1

Brands by name

Popular brands

Hitachi BZ-1, Manual

Search results

Summary of Contents for BZ-1

Reviews:

Related manuals for BZ-1

Brands by name

Popular brands