Hitachi BW-V80BS, User Manual

Page: 50 / 60

50
Near the fabric softener feeding case socket
዁ㅯԵ༼ҘᲬတҘםえⲖ
Please wipe with a wet cloth periodically (once per week) or when there are fabric softener residue or stains.
⦼હቅ
(1
ᓝ
/
ⳕ
)
໣߱ሷ዁ㅯԵ㓸えȮሷᖸឬᆹŊᮢᠪలჍ཯ȯ
Ȣ
Please clean any softener off of the softener feeding case, the lid, as well as the lid sockets.
⦼ᛤᘺ዁ㅯԵ༼Ҙ̤Ȯ╾ઈȮ╾ઋᾀᗹሷ዁ㅯԵ᱿ⵒ̤ȯ
Ȣ
If the stains are more severe, please immerse in hot water (apprximately 40°C) for about 5 minutes and then clean with a tooth brush.
ॖኞᖸឬⰱް⸅Ŋ⦼߱ᥖᖛ
(
₎
40°C)
ʑᙺᘗ₎
5
Ӡ⾝Ŋᤋരᮢᧃӽᾀᛤᘺȯ
Ȣ
If it is frozen, please place the softener feeding case in hot water (approximately 40°C)
ॖኞӉ⃌Ŋ⦼߱዁ㅯԵ༼ҘᲬʑᄍҘᥖᖛ
(
₎
40°C)
ȯ
Please confirm that the lid has been installed.
⦼ᷨ⦓఩⡶ʀ╾ઈȯ
2
Wipe off the water and re-install
ჍʯᖛӠŊྈ׆ᑂમ⡶
3
Remove the cover of the fabric softener feeding case and clean off the stains
૽዁ㅯԵ༼ҘᲬ᱿╾ઈחʁŊᛤᘺᖸឬ
1
Re-install the fabric softener feeding case the way it was
૽዁ㅯԵ༼ҘᲬྈ׆ᑂમ⡶
3
2
Use a wet cloth to clean the area around the fabric softener
feeding case
ᮢᠪలჍ཯዁ㅯԵ༼ҘᲬشߣ
Clean off stubborn stains with a tooth brush
ㅸߗᖸឬᮢᧃӽᛤᘺ
Remove the fabric softener feeding case
བྷʁ዁ㅯԵ༼ҘᲬ
Lid
╾ઈ
Fabric softener
feeding port
዁ㅯԵ༼Ҙ̤
Face the hose downward, but do not let it bend.
૽ͧᖛᾷቄʁŊ̟ʃ⋱⩕Ңഈሧȯ
· This is to prevent the water that is still in the hose from flowing out.
˫҉ᔬᮽ߱ͧᖛᾷʑ᱿ᖛᙟӛȯ
2
Select the "Tub Clean" program and cease operation
after 30 seconds.
ⴆႹȵᾉᛤᘺȶỄ಍Ŋ⳥Ⱨ
30
ấ⾝രϟᔋ⳥̳ȯ
· This will allow all of the remaining water in the inlet
water hose to flow out.
ר૽ᔬᮽ߱ͧᖛᾷʑ᱿ᖛҚⵒ࿢ӛȯ
3
Put down the water drainage hose.
ᄍʁ࿢ᖛᾷȯ
4
Set "Spin" for 30 seconds.
⥑હȵ⌉ᖛȶŊ⳥Ⱨ
30
ấȯ
5
Turn off the power.
〦⿬ヅ᜺⿭〦ȯ
· In order to allow water from the basket and the drain hose
to flow out, the drain valve should be kept in an open state.
ᣅ࿢ӛᾉҙُ࿢ᖛᾷʑ᱿ᖛ
,
ະ͐࿢ᖛ⿿Ύྃ⿭ۓᨊ๗ȯ
6
1
Close the water faucet and remove the inlet water hose.
(Removalmethod
11)
〦⿬ᖛ㕻ㆊŊབྷʁͧᖛᾷȯ
(
བྷֲᅞᘍ
11)
After water is turned off and the water supply
hose is temporarily removed, please turn off the
waterfaucet, select the "Tub Clean" program, press
the start button, and slowly turn on the water faucet.
ϟᖛരדᇺᆹབྷֲͧᖛᾷരҪ⡶ⶪ᱿෼ᗼʁŊ
⦼〦⿬ᖛ㕻ㆊŊⴆႹȵᾉᛤᘺȶỄ಍Ŋྈʁ
ం
Ւྈ⸹Ŋ๨๨༌⿭ᖛ㕻ㆊȯ
If freezing has already occurred
ॖኞ఩⃻⃌Һᆹ
Remove the water supply hose and place it into
water with a temperature of about 40
Ą
C.
ֲʁͧᖛᾷŊᄍҘ
40
Ą
C
ఢ׬᱿ᝐᖛʑȯ
1
Pour warm water with a temperature of about 40
Ą
C
into the basket.
߱ᾉҙΪҘ
40
Ą
C
ఢ׬᱿ᝐᖛȯ
3
Pour warm water with a temperature of about 40
Ą
C
into the water feeding case.
߱ͧᖛםʑΪҘ
40
Ą
C
ఢ׬᱿ᝐᖛȯ
2
Then, connect the hose with the water faucet and check
whether water enters the washing machine properly,
whether the draining of water is performed properly, and
whether the water inlet operations properly.
Ҫ૽ͧᖛᾷ࿲ӷᖛ㕻ㆊŊᒑውᘺ⠥ᑨᆯ؋ᔌ౑ͧᖛȮ
࿢ᖛŊͧᖛםᆯ؋⳥̳ᔌ౑ȯ
4
Notes
ᘜา
When freezing could occur
ሷר⋱⃌Һᆹ
Maintenance (continued)
㏣ؤؓ佀δ㓂ε