84
Troubleshooting
(continued)
Indicator and meaning
Possible cause and solution
Drying is not completed,
even after a maximum of 2
to 6 hours of drying.
z
After a maximum of 10
hours of drying for the
[POWER SAVE] program.
Press
<OFF> to
turn off
the power.
z
Check whether there is lint in dry filter or dry filter port.
If it is clogged, perform maintenance.
(P. 78, 79)
z
Make sure the laundry has been spun and is not tangled.
z
Make sure water is being properly supplied. (Water is used
for cooling operations during drying.)
Refer to the solution for when “C01” is displayed.
z
Make sure the drain hose is installed properly.
Refer to the solution for when “C02” is displayed.
Press
<ON> to
start the
operation.
The door cannot be locked or
unlocked.
Press
<PAUSE>
to pause.
z
Close the door completely.
z
Make sure the laundry load is not too large.
Press
<START>
to start
the
operation.
The lint filter is not inserted
properly.
z
Insert the lint filter properly.
Turn the lint filter knob clockwise until it clicks into place.
(P. 76, 77)
Press
<START>
to start
the
operation.
The lint filter is clogged.
Press
<OFF> to
turn off
the power.
z
Check whether the lint filter is clogged.
If it is clogged, perform maintenance.
(P. 76, 77)
z
This appears after every 30 times the <<WASH>> and
<<WASH DRY>> are operated (even if lint buildup is low).
Press
<ON> to
start the
operation.
Spinning is not possible.
Press
<PAUSE>
to pause.
z
Make sure the drain hose is installed properly.
Refer to the solution for when “C02” is displayed.
(P. 83)
z
Check whether there is excessive foaming.
Run a rinse operation before trying to spin again.
(P. 59)
Press
<START>
to start
the
operation.
The drying load is too large.
Press
<PAUSE>
to pause.
z
Check the size of your laundry load.
Reduce the number of items.
The amount of laundry that can be dried depends on the
size and type of the items.
Press
<START>
to start
the
operation.
The drum cannot rotate.
Press
<PAUSE>
to pause.
z
Check the size of your laundry load.
Reduce the number of items.
z
Check whether the laundry is tangled.
Untangle the laundry.
z
Check whether there is excessive foaming.
Run a rinse operation before trying to spin again.
(P. 59)
z
Do not use an extension cord to connect the power plug.
z
Do not connect other appliances to the same power outlet
as the machine.
Press
<START>
to start
the
operation.
The dry filter is clogged.
Press
<OFF> to
turn off
the power.
z
Check whether there is lint in dry filter or dry filter port.
If it is clogged, perform maintenance.
(P. 78, 79)
(The
[DRY FILTER] indicator may light again, even after you
clean the dry filter and turn the power on. In such cases,
press the <START> button to turn it off.)
z
This appears after every 20 times the <<WASH DRY>> and
<<DRY>> are operated (even if lint buildup is low).
Press
<ON> to
start the
operation.
If the following occurs, stop operations and contact a service representative.
z
If the “CXX” indication persists even after performing the above solutions.
z
If an “FXX” or “CXX” indication not described above persists even after turning the power off and turning it on again.
