Charging Your iPhone/iPod
1. Your iPhone/iPod has an internal non-removable battery, the battery may need to be
charged if the iPhone/iPod has not been used for awhile.
2. You can charge the iPhone/iPod through the unit automatically under the STANDBY or
POWER ON mode.
• It is not recommended to charge when using the TUNER mode. It may
interfere with the reception.
• To avoid damaging your iPhone/iPod or the unit please take care when
inserting and removing your iPhone/iPod from the dock.
• The unit does not support charging 1
st
, 2
nd
, 3
rd
Generation iPods.
The iPhone/iPod battery is 80% charged in about an hour, and fully charged in
about a few hours. If you charge it while playing music, it may take longer.
FM Operation
During POWER ON mode, tap the FUNCTION icon on the unit or press the FUNCTION
button on the remote control repeatedly to the TUNER mode to select a FM station.
Searching for a Station Manually
•
To tune for weak station, tap the SKIP/TUNE SEARCH
icons on the unit or
press the
buttons on the remote control continuously until you reach the
correct frequency or the reception is at its best.
Searching for a Station Automatically
•
Tap and hold the SKIP/TUNE SEARCH
icons on the unit or press and hold the
buttons on the remote control until the tuner starts reverse/forward searching
for a station. After tuning into a station, the search stops.
•
The search may not stop at a station with a very weak signal.
Selecting Mono / Stereo
This unit can receive the FM mode only.
•
Tap the SELECT/MONO/ST. icon on the unit or press the SELECT/MONO/ST. on the
remote control repeatedly to select FM stereo/mono mode. The “
“ indicator will
show on the display in stereo signals reception.
Select mono mode is helpful when receiving poor signal reception.
27
GB
AXM845E_IB_GB_120510_candice.indd 27
10/05/2012 6:20 PM
