Hitachi AX-M138, Instruction Manual

Page: 25 / 29

- 24 -
If you change the sleep timer, each time you press the sleep button (
SLEEP
), it changes
the number of minutes shown on the VFD in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display
as before setting the sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When pressing the sleep button (
SLEEP
), the remaining sleep time is displayed. After a few
seconds the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (
SLEEP
) until the “00” displays on the VFD.
You can also cancel the sleep timer turning off the system.
Function Menu Setting List
Caution:The content of this chart is for reference only. If something has changed, please take the actual
display for standard.
Menu function setup
* If you want to set the function of this unit, please press the function setting button to
display the DVD function setting main menu, then use the , , , buttons and
OK
button. Press the function setting button (
SETUP
) again to exit the function setting main
menu.
( Note: If the item displays in gray, that means that it can’t be setup and there isn’t this
function in the disc.)
System Setup
Screen Saver
Set the screen saver to activate or cancel.
TV Type
- 4 : 3 PS......When selecting this mode, wide picture
displayed on the screen will be cut automatically.
- 4 : 3 LB......When selecting this mode, wide picture dis-
played on the screen will have black top and bottom area.
- 16 : 9 ......If this system connects wide screen TV,
selecting this mode.
Password
Select this item to set new password for this unit, fol-
low the screen’s indication and enter a password.
The original password is 0000.
Rating
Setup this system when playing disc which had age
control.
Default
Restore to factory setting.