- 11 -
Sound Quality
Adjusting the Volume
To increase or decrease the volume, rotate the Volume Control knob (
- VOLUME C
) on the
amplifier or press the Volume Up/Down buttons (
VOL +/-
) on the remote control.
For private listening, you can connect headphones to the headphone jack, and no sound will come
out from the speakers.
Note:
Be sure to turn down the volume before connecting or putting on headphones. Do not listen
to headphones at high volume, as such use can permanently damage your hearing.
Warning:
The default volume setting is at 12.
Adjusting the super bass
You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the Super Bass button (
S-BASS
) on the remote control to get the effect, the word
“S-BASS” will display on the Vacuum Fluorescent Display (
VFD
). Press the Super Bass button
(
S-BASS
) again to cancel the effect.
Control the Loudness
This unit has loudness function, which can automatically increase the bass sound effect at low
volume. It can also increase the bass sound effect at high volume, but it will be relatively less
when it is at high volume. Press the Loudness button (
LOUDNESS
) on the remote control to obtain
the loudness function, the word “LOUD” will display on the Vacuum Fluorescent Display (
VFD
).
Preset Equalizer
You can adjust the sound reproduced simply by choosing from 5 preset equalizers. Press the
Preset Equalizer button (
P-EQ
) repeatedly to scroll through the following options:
Changing the Vacuum Fluorescent Display (VFD) Darkness
This unit has three brightness levels for you to adjust the clock display. You only need to press the
Vacuum Fluorescent Display (
VFD
) Dimmer Control button (
DIM
) on the remote control, then you can
choose the proper lighting to use this system at different times.
Listening to Radio Broadcasts
DAB Radio
Tuning to DAB for the first time
*
Press the Function button (
FUNCTION
) repeatedly on the front panel of the amplifier or the Tuner
button (
TUNER
) on the remote control to select the DAB station.
*
The system will start to a quick scan to search for all available Band lll channels automatically.
*
If no DAB service is available “NO SIGNAL” will be displayed.
*
If there are available DAB services, the system will store all detected stations.
*
At completion of the scanning, the system will tune to a station on the list.
Tuning to a station
1. Press the Reverse/ Fast Forward buttons (
D
/
C
) to select the desired station from the list.
2. Press the Play/Pause button (
BF
) to confirm.
POPS
JAZZ
CLASSIC
ROCK
FLAT
