manualshive.com logo in svg

Hitachi Accuvue HM-4721-D, User Manual

Share
Download
Hitachi Accuvue HM-4721-D User Manual Download Page 12

 

 

This section describes how to adjust the display setting.
The buttons on the front panel of the monitor enable you to adjust 

the

following settings:

Table 3.1 Adjustable items and Indicators

Mode

Mode 1

MODE

Mode 2

MODE

Display setting

-- 

Horizontal Width
Vertical Centering

 Ref.

Vertical Height

Rotation

Color 1

G (Green)

How to adjust display setting.

Look for adjustment item which you want to adjust and see ref. page.

How to store the adjusted display setting data.

Press the STORE button after adjusting display setting.

How to RESET factory setting

Press the RESET button.

 Contrast button

Adjusts the screen contrast (difference between lightest and darkest
parts). Press the   button to increase the contrast, and the 

button to decrease it.

Press 

 two buttons simultaneously to detent the contrast.

 Brightness button

Adjusts the screen brightness. Press the   button to increase the

brightness, and the   button to decrease it. Press the two buttons

simultaneously to detent the brightness.

E - 9

Summary of Contents for Accuvue HM-4721-D




























Reviews:

No comments

Brands by name

Popular brands

Load more brands