Hitachi 55HK6T74U A, Instruction Manual

Page: 10 / 40

English - 9 -
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
TV Control & Operation
The M oystick allows you to control the Volume /
Programme / Source and Standby-On functions of
the TV.
Note:
The position of the joystick may differ depending on
the model.
To change volume: Increase the volume by pushing
the M oystick right. Decrease the volume by pushing
the M oystick left.
To change channel: Scroll through the stored
channels by pushing the M oystick up or down.
To change source: Press the centre of the M oystick
in the sources list will appear on the screen. Scroll
through the available sources by pushing the M oystick
up or down.
To turn the TV off: Press the centre of the M oystick in
and hold it down for a few seconds the TV will turn
into standby mode.
To turn on the TV: Press the centre of the M oystick
in the TV will turn on.
Note:
Main menu OSD cannot be displayed via control button.
Operation with the Remote Control
Press the Menu button on your remote control to
display main menu screen. Use the directional buttons
to select a menu tab and press
OK to enter. Use the
directional buttons again to select or set an item. Press
Return/Back or Menu button to quit a menu screen.
Input Selection
Once you have connected external systems to your
TV
you can switch to different input sources. Press the
Source button on your remote control consecutively
to select the different sources.
Changing Channels and Volume
You can change the channel and ad M ust the volume
by using the /- and Programme +/- buttons
on the remote.
Inserting the Batteries into the Remote
Remove the back cover to reveal the battery
compartment. Insert two si
] e AAA batteries. Make
sure the (+) and (-) signs match (observe correct
polarity). Do not mix old and new batteries. Replace
only with same or equivalent type. Place the cover
back on.
Connect Power
IMPORTANT : The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna Connection
Connect the aerial plug to the AERIAL INPUT (ANT-
TV) socket located on the rear bottom side of the TV.
Rear bottom side of the TV