TIPS ON REAR PANEL CONNECTIONS
13
TIPS ON REAR PANEL CONNECTIONS
S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections
in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the television.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 1 in the
example on page 12). Refer to your VCR operating guide for more information on line input-output connections.
You may use VIDEO or S-VIDEO inputs to connect to Input 1 or Input 2, but only one of these may be used at a time.
Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
COMPONENT: Y-PBPR (INPUT:4) connection is provided for high performance components, such as DVD players. Use this
connection in place of the standard video connection if your device has this feature.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV s Pb input
and the components R-Y output to the TV s PR input.
Your component outputs may be labeled Y-CBCR. In this case, connect the components CB output to the TV s PB input and the
components CR output to the TV s PR input.
You may use standard video signal or 480i signal for INPUT:4.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs. (See page 49)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPR jacks.
Summary of Contents for 53SBX10B
Page 60: ...QR47651 ...
