Hitachi 43R5, Owner'S Manual

Page: 67 / 84

55
Scanning for broadcast TV channels again
There will be times when you need to create a new channel list. For example, you:
•
Change cable providers
•
Reorient your TV antenna
•
Move to a different city with different channels
Whenever you need to update your TV channel list, you can repeat the channel scan.
Tip :
Repeat the channel scan from time to time to make sure you are receiving all of the latest channels. Broad-
casters add and remove channels, move channels to different parts of the spectrum, and change the power levels
of their channels periodically.
To repeat the channel scan, from the Home screen menu, navigate to Settings > TV inputs > Antenna TV > Scan again
for channels . Then select Start finding channels to begin the channel scan process. The screens and options that appear
during this process are identical to those described in “ How do I set up the TV tuner? ” on page 21 .
Setting the HDMI mode
You can independently configure each HDMI input to match the capabilities of the connected device. From the Home
screen menu, navigate to Settings > TV inputs , and then select an enabled HDMI input. Next, select HDMI mode and
then select one of the following settings:
• Auto – Let the TV determine the best setting. Use this option unless your HDMI device does not correctly com -
municate its HDMI version compatibility.
• HDMI 1.4 – Configure the input for compatibility with HDMI version 1.4, which supports a maximum refresh rate
of 30 Hz at full UHD resolution. Most HDMI devices will work correctly with the TV in this mode.
• HDMI 2.0 – Configure the input for compatibility with HDMI version 2.0, which supports a maximum refresh rate
of 60 Hz at full UHD resolution. Many older HDMI devices will not work correctly if the TV’s HDMI input is config -
ured for this mode.
Using the TV in a home theater
Your TV has several features that make it an ideal TV for a home theater. But you might not notice them because they
remain in the background until you decide to use them.
Turning off the speakers
When you use your TV with a sound bar or an external amplifier and speakers, you’ll probably want to turn off the inter -
nal TV speakers.
To turn off the TV’s built-in speakers, in the Home screen menu, navigate to Settings > Audio > TV speakers and change
the setting.