Hitachi 42PD9800TAFW1, Service Manual

Page: 24 / 98

24
42PD9800TA (FW1)
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
[Note] Never adjust without use of the specified signal.
If that were done by mistake, the picture would become abnormal in black level, contrast and color.
In this case, it will be recovered by re-adjustment in the specified way.
Item
Preparation Procedure
(1) (1)
(2)
Amplitude Adjustment (576p)
Input 576p adjustment signal into AV1 terminal. Receive 576p adjustment signal, and indicate
Service Adjustment Menu.(Main (1))
Select No.597 of Service Adjustment Menu.
Press [OK] key more than 2 seconds to start the
automatic adjustment.
The adjustment completes when the indication
[Auto Mode] at the bottom of the screen
disappears.
Item
Preparation Procedure
(1) (1)
(2)
Amplitude Adjustment (576i)
Input 576i adjustment signal into AV1 terminal. Receive 576i adjustment signal, and indicate
Service Adjustment Menu.
Select No.597 of Service Adjustment Menu.
Press [OK] key more than 2 seconds to start the
automatic adjustment.
The adjustment completes when the indication
[Auto Mode] at the bottom of the screen
disappears.
8 Color Bar
(Included 102 IRE
White signal)
8 Color Bar
(Included 102 IRE
White signal)