background image

37

ENGLISH

TV SETUP OPERATION (continued)

Audio Menu

With this menu, you can adjust and customize the audio condition as you like.  
You can move on to the next menu screen by pressing ▼button at the bottom.

Selected Items

Setup hint

Audio Mode

Movie

 You can select the most suitable sound condition from 4 
alternatives according to the contents.
If you want to adjust each item value based on your 
preference, select “Favourite”.

Music

Speech

Favourite

Treble**

-15~+15

Adjust the Treble.

Bass**

-15~+15

Adjust the Bass.

Balance

-10~+10

Adjust the balance of the sound from right and left speakers.

SRS

Off

This system gives you the dynamic 3D sound. Select it 
depending on your preference.

Normal

Wide

TruBass

Off

TruBass gives you the enchanced bass sound.
Select it depending on your preference.

Low

High

BBE

Off

BBE High Defi nition Sound restores clarity and presence 
for better speech intelligibility and musical realism.
Select it depending on your preference.

Low

High

Perfect Volume**

Off

It will automatically adjust the volume to its average level 
each time you change the channel.

On

Internal Speaker

Off

This needs to be switched to Off when you want to take 
audio from external epuipment.
It is normally set to On when you operate the set using 
the built in speakers.

On

Reset

Reset all the set values on this Menu Page to the original 
factory settings.

Audio
  Audio Mode 

: Movie

  Treble 

: +15

  Bass 

: –15

  Balance 

0

  SRS 

: Normal

  TruBass 

:  Low

  BBE 

:  Low

  Perfect Volume 

:  Off

  Internal Speaker 

:  On

  Reset 

Reset

   Select          Set             Return

L

R

Audio
  Head Phone Volume : 

+20

  Head Phone Select 

: A/B

   Select        Adjust           Return

Summary of Contents for 42PD9700C
















































































Reviews: