- 21 -
Obtain the Conditional Access Module
(CAM) and the Viewing card by subscribing
to a pay channel company, then insert into
the Television using the following proce-
dure.
1. Switch off the TV and unplug from the
mains.
2. Insert the CAM, then Viewing Card to the
slot that is located in the terminal cover at
the left-hand side of the TV (from front
view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The
CAM or the TV terminal may be damaged if
the CAM is forcefully inserted.
3. Connect the TV to the mains supply,
switch on and then wait for few moments
until the card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Common Interface then pressing
“OK” button. (CAM set up menu is not dis-
played when it is not required.)
• To see the viewing contract information:
Enter IDTV; press “
” button, then highlight
Common Interface
and press “OK” button.
• When no module is inserted, “
No Common
Interface module detected
” message ap-
pears on the screen.
• Refer to the module instruction manual for
details of the settings.
Analogue TV Menu System
Your TV has been designed with a menu
system to provide easy manipulation of a
multifunction system.
Press the
button to enter the menu.
Press
_
/
`
button to select a menu title and
then
a
/
b
button to select a menu item and
_
/
`
or “
OK
” button to enter the menu item.
• Press the
button to exit the menu.
• Press the
button to return to the previous
menu.
Picture menu
By pressing
_
/
`
button, select the first icon.
Picture menu appears on the screen.
Mode
Cinema
PICTURE
Contrast
PAL 50Hz
Brightness
Sharpness
Colour
Colour Temp
Warm
Noise Reduction
Medium
Reset
10
24
62
32
Film Mode
Off
3D Comb
Off
Mode
By pressing
a
/
b
button, select
Mode
.
Press
_
/
`
button to choose one of these
options:
Natural
,
Dynamic
and
Cinema
.
Picture mode can be changed directly by
pressing the
button.
Contrast
By pressing
a
/
b
button, select
Contrast
.
Press
`
button to increase contrast. Press
_
button to decrease contrast. Contrast level
can be adjusted between 0 and 63.
Brightness
By pressing
a
/
b
button, select
Bright-
ness
. Press
`
button to increase brightness.
Press
_
button to decrease brightness.
Brightness level can be adjusted between 0
and 63.
Sharpness
By pressing
a
/
b
button, select
Sharp-
ness
. Press
`
button to increase sharp-
ness. Press
_
button to decrease sharp-
ness. Sharpness level can be adjusted be-
tween 0 and 31.
Colour
By pressing
a
/
b
button, select
Colour
.
Press
`
button to increase colour. Press
_
button to decrease colour. Colour level can
be adjusted between 0 and 99.
