Hitachi 35TX10B, Operating Manual

Page: 63 / 94

SET UP
63
Refer to your cable or TV guide for channel identification standards.
If certain CATV channels are poor or not possible in the CATV1 mode, set AIR/CABLE
to CATV2.
AUTO PROGRAM
This feature will automatically store active TV channels in CHANNEL MEMORY. This
will allow you to skip over unused channels when using the CHANNEL UP (
) or
DOWN ( ) buttons.
If the MENU button is pressed while the auto programming function is engaged,
programming will stop. If two antennas are connected, switch antenna inputs with the
ANT button and repeat auto programming for the second antenna input.
Remember to set the correct AIR/CABLE mode before using auto programming for the
second antenna input.
See CHANNEL MEMORY to add or erase additional channels.
CHANNEL MEMORY
Using this function after AUTOPROGRAM to add or erase additional channels by the
remote control CHANNEL
, buttons. Your Choice will be highlighted in magenta.
Add or erase additional channels while still in CHANNEL MEMORY using the
CHANNEL
, buttons or number buttons and then add or erase using the CURSOR
, buttons.
CLOSED CAPTION
Closed captions are the dialogue, narration, and/or sound effects of a television