Hitachi 22LD4500, Instructions For Use Manual, Page: 64 / 71

63
Search for and store the test signal of
the video recorder
• Unplug the aerial cable from the aerial socket
“ Aerial ” of your video recorder.
• Switch on your TV and put the video recorder on
the test signal. (See the handbook for your video re-
corder.)
• Search for the test signal of your video recorder in
the same way as you searched for and stored the
TV signals. See Install, Search and Store TV chan-
nels. Store the test signal under programme number
0.
– Replace the aerial cable in the aerial socket “ Aerial ”
of your video recorder once you have stored the
test signal.
Camera and Camcorder
To connect to (AV-3) input
Connect your camera or camcorder at the rear side
of your TV.
• Connect your equipment to the TV via
VIDEO (yel-
low), AUDIO R (red) and AUDIO L (white) inputs.
You should connect the jacks to the input in the
same colour.
Connect the decoder to the video
recorder
Some video recorders have a special euroconnector
for decoder.
• Connect a eurocable to the euroconnector of your
decoder and to the special euroconnector of your
video recorder. See also the handbook of your
video recorder.
• To connect your video recorder to the TV, see TV
and Video Recorder section.
If you want to connect more equipment to your TV,
consult your dealer.
Connecting Headphones
Use the stereo headphone socket on the rear side of
your TV, to connect headphones.
Connecting the PC
Connect PC monitor with 15-pin PC cable to the 15-
pin connector on the rear of the computer. For detail
installation procedure see
Installation in PC mode.
To connect to S-Video input
Connect your camera or camcorder at the rear side
of your TV.
• Connect your equipment to the TV via S-Video in-
put at the back side by using S-Video cables.
1549 UK-IDTV TV-DVB-22'' TFT IB-2-(Revised - 19x27).p65 01.12.2004, 13:49 63