Once the TV has found all your local stations, they are then automatically assigned a
programme number and name, if available from the broadcast.
If you would like to change the programme number or order, please refer to the Program Menu
section of the instruction book.
important note before starting Auto Setup
important note.
start A.P.S. (Auto Programming System)
GB
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV
please ensure that they are switched on before automatic tuning begins. In the case of
a VCR, insert a pre-recorded tape and begin playback of your equipment. These
measures ensure that all your external equipment is tuned in during the Auto Setup
procedure.
Auto. Programming System
Language
Country
English
U.K.
Check the antenna cable
Auto. Programming System
Automatic tuning runs at: 78 %
State: Fine scanning ...
Exit : TV
First select the language by using the “ ” or “ ” buttons on the remote
control.
Use the “ ” or “ ” to select Country. Select the country by using “ ” or “ ”
buttons on the remote control
1
2
3
If you wait until the end of A.P.S., Program Table is displayed with the
programmes found and located. Press TV on the Remote Control to
remove the menu and start viewing TV.
4
Press "OK" button on the remote control to start A.P.S. The set will
tune in all available channels.
EU
