QUICK SET-UP GUIDE
1. CONNECTING YOUR AERIAL
2. INSTALLING BATTERIES
1.
Open the battery compartment.
3.
Close the battery compartment.
2.
Install the R6 (AA-Size) batteries as
shown below.
Your television has an Automatic Tuning System which makes tuning in your television easy. This Automatic
tuning System scans the entire reception range in your area and automatically stores all available analogue
and digital channels of suitable signal strength in the correct order e.g. BBC1 will tune into channel 1, BBC2
will tune into channel 2, etc.
THE AUTOMATIC TUNING PROCESS WILL ONLY START BY ITSELF THE FIRST TIME YOU SWITCH
THE SET ON. HOWEVER YOU CAN RESTART THIS PROCESS VIA THE MENU SYSTEM. (see next
page.)
1.
Press
on the TV or remote control. The Auto Installation menu will appear first.
Press
ϳ
or
ϴ
to select LANGUAGE, then press
ENTER
. Press
ϵ
or
϶
to select desired language, then
press
ENTER
.
2.
Press
ϳ
or
ϴ
to select COUNTRY, then press
ENTER
. Press
ϵ
or
϶
to select your country, then press
ENTER
.
3.
Press
ϳ
or
ϴ
to select AUTO TUNING, then press
ENTER
. The confirmation screen will be displayed.
Press
ENTER
to start automatic tuning. Your TV will now automatically tune in all available channels.
Note: Please be patient - the Auto Tuning process can take several minutes to complete.
4.
When the programme on the screen stops changing and the sound comes on, the tuning process is
complete.
3. AUTO SETUP
AUTO INSTALLATION
ENGLISH
EXIT : END
MENU: RETURN
LANGUAGE
ENGLISH
COUNTRY UK
AUTO TUNING
AUTO INSTALLATION
UK
EXIT : END
MENU: RETURN
LANGUAGE ENGLISH
COUNTRY UK
AUTO TUNING
AUTO INSTALLATION
AUTO TUNING
1%
EXIT : END
MENU: RETURN
LANGUAGE ENGLISH
COUNTRY UK
AUTO TUNING
MODEL 19LD5550U/ 22LD5550U
(A) Power supply:
Connect the supplied power cable to an
AC 220-240V/50Hz mains power supply only - do not
attempt to connect it to any other type of supply.
Never try to repair a damaged AC power cord with
isolation-tape - this should be repaired by a specialist
or replaced. Do not let your pet loose near the cable.
Animals biting into the cable could receive a fatal electric
shock, and could cause a hazard to others.
(B) HEADPHONE jack:
Plug headphones with a mini plug
(3.5 mm) into this jack.
(C) COMPONENT input:
See P.28.
(D) VIDEO input (AV2):
Input for analogue AV-Signal
(Composite or S-Video). See P.28.
(E) DVB-T Digital audio output:
digital output for DVB-T
sound (see page 28).
(F) PC MONITOR input (PC):
See P.25.
(G) PC/HDMI AUDIO input:
See P.25, 26.
(H) HDMI input :
See P.26.
(I) Scart socket (AV1):
For the connection of scart cable.
See P.28.
(J) ANT:
Plug in the antenna (aerial) here.
(K) C.I. slot:
for DVB-T-PayTV (see page 22).
(L) Bracket holes:
Fix a wall mounting bracket (not
supplied) here.
(M)
To hang the television on a wall, remove these screws
and then remove a stand.
Before performing work spread cushioning over the base
area to lay the TV on.
Back Side
(K)
(M)
(L)
(B)
(C)
(D)
(F)
(I)
(G)
(J)
(H)
(E)
(A)
19LD5550U
