12
On-screen Language Selection
1
Select LANGUAGE (unless
you have already selected
when the set was fi rst
switched on).
Then press
ENTER
.
ENGLISH
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
2
Press or to select the desired language.
3
Press
EXIT
to return to the normal screen.
Automatic station presetting with the
built-in Tuner
Perform this feature to search for and store new
analogue TV programmes after the Automatic
installation. (P.11)
Preparation:
Make sure your antenna is connected to the antenna
input (see P.10). Select ATV (see P.11). Then press
ANALOG MENU
.
1
Select AUTO TUNING, then press
ENTER
.
2
Select COUNTRY, then
press
ENTER
.
Press or to select your
country, then press
ENTER
.
COUNTRY
START
UK
3
Select START. Then press
ENTER
.
The automatic tuning will search for available
broadcasts and should store the channels
in the correct order. During the search the
sound is muted. When all programs have been
stored, the normal TV screen will appear.
Note:
To restart digital auto tuning, see page 18.
When the COUNTRY is set to UK, the automatic
tuning will search for UHF broadcasts only.
•
•
Changing the order of stored
channels
The Automatic station presetting stores the
stations in a specifi c order. However, this order
can be changed if you wish.
1
Press
ANALOG MENU
. Select CH
ALLOCATION.
Then press
ENTER
.
2
Select desired option, then
press
ENTER
.
SORT
ERASE PROGRAM
SKIP
CH LABEL
3
After setting the each option,
press
ANALOG MENU
to
return to CH ALLOCATION
memu.
4
Press
EXIT
to return to the normal screen.
Note:
When changing the order of the channels, it is best to
start with CH1.
•
Description about the each setting option:
SORT:
Press or to select the channel that you want
to move, then press
ENTER
.
Press
or to select the position that you want to move
the channel to, then press
ENTER
.
ERASE PROGRAM:
Press or to select the channel
that you want to erase, then press
ENTER
.
SKIP:
Press or to select the channel that you want
to skip, then press
ENTER
.
mark will appear.
CH LABEL:
Press or to select channel that you want
to rename, then press
ENTER
. Press or to select
character, then press or . The cursor will move to the
next position. Press
ENTER
to set the channel label.
Manual TV station presetting
If you like, you may manually tune a certain
station into a selected memory-cell, without
deleting or modifying other memory-cell’s
contents. Example: Store the BBC 2 into
memory-cell 2.
1
Preparation:
Select ATV (see page 11).
Select memory-cell 2. Press key
2
(see page
13). OSD will indicate
2
in right upper
corner. Eventually recently stored TV-channel’s
name might also appear.
2
Press
ANALOG MENU
. Press or to select
tool-page. Press or to select MANUAL
TUNING. Press
ENTER
.
3
COLOUR SYSTEM and SOUND SYSTEM has
already been preset to AUTO. Do not touch.
4
Press
or to select
SEARCH. Press
ENTER
.
Press or -key, to start
tuning. Tuning will stop
automatically at next
available station. If this does
not happen to be the BBC 2,
SEARCH
FINE 168.30MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
BBC 2
175.30MHz
press or -key again to continue tuning for
the BBC 2. Then press
ENTER
.
5
If you like use fi ne-tuning. Select FINE and
press
ENTER
. Press or , to fi ne tune. See
the note on this page.
6
To store other stations in additional memory-
cells, repeat steps 1 to 5.
7
Press
EXIT
to return to the normal screen.
Note:
Usually fi ne tuning is not necessary, due to tuning’s
automatically stopping at the very best position. If you
fi ne-tune anyway, proper working of teletext-reception
with built-in tuner is no longer guaranteed.
•
