Hitachi 19LD2550BB Instructions For Use Manual Download

Page: 16 / 49

English

- 15 -

Switching the TV On/Off

To Switch the TV On

•

Your TV will switch on in two steps.

•

Connect the power cord to 220-240V AC 50
Hz. Press stand-by button. Then the TV
switches itself to stand-by mode (Optional).

•

To switch on the TV from stand-by mode

either:

• Press a digit button on the remote control so

that a channel number is selected, or press
the

-P/CH

P/CH+

button on the TV or press

the

P/CH+

P/CH-

button on the remote

control, so that last mode switched off is
selected. By either method the TV will switch
on.

To Switch the TV Off

• Press the “

(stand-by)” button on the

remote control or stand-by button on the TV,
so the TV will switch to stand-by mode.

• To power down the TV completely, unplug

the power cord from the mains socket.

Input Selection

Once you have connected external systems
to your TV, you can switch to different input
sources.

• Press the

button on your remote control

until the desired source is highlighted. The
TV will then switch to the selected source
after a short while.

Source

EXT1
YPBPR

HDMI

DTV

Basic Operations

You can operate your TV using both the
remote control and buttons on the set.

Operation with the Buttons on the TV
Volume Setting

• Press

button to decrease volume or

button to increase volume, so a volume

level scale (slider) will be displayed on the
screen.

Programme Selection

• Press

P/CH +

button to select the next

programme or

P/CH -

button to select the

previous programme.

Entering Main Menu

• Press the

MENU

button to enter main menu.

In the Main menu select sub-menu using

CH -

P/CH +

buttons and enter the sub-

menu using

buttons. To learn

the usage of the menus, refer to the menu
system sections.

AV Mode

• Press the

TV/AV

button at the control panel

on the the TV to switch your TV to AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to

control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.

• Functions of the menu system are described

in the following sections.

Volume Setting

Press

button to increase the volume.

Press

button to decrease the volume. A

volume level scale (slider) will be displayed
on the screen.

ENG-1994W-1055 UK-17MB24H UK IDTV-(BACK LINE OUT-YPbPr-WO SVHS)-10052630-50116999.p65

16.10.2007, 14:49

Summary of Contents for 19LD2550BB


















































Search results

Summary of Contents for 19LD2550BB

Reviews:

Related manuals for 19LD2550BB

Brands by name

Popular brands

Hitachi 19LD2550BB, Instructions For Use Manual

Search results

Summary of Contents for 19LD2550BB

Reviews:

Related manuals for 19LD2550BB

Brands by name

Popular brands