Hitachi 17LD4220U, Instructions For Use Manual

Page: 14 / 36

- 13 -
sound system is Mono and the sound effect
is set ON , then the sound will be heard as if
it is Stereo . If the current sound system is
Stereo , switching this effect on will give a
more spatial sound.
6RXQG
2Q
To Change H.Phone/Line Out Settings
• Using “ ” or “ ” button select H.Phone/
Line Out.
• Press “ ” or “ ” button or directly press
“ OK ” button on H.Phone/Line Out , to enter
the H.Phone/Line Out menu. This is a sub-
menu of Sound menu, and all options in
this menu are working as the same in the
Sound menu.
6RXQG
Setting H.Phone/Line Out Volume
• As you enter the H.Phone/Line Out sound
menu, Volume will be the first selected op-
tion.
• Press “ ” button to increase volume.
• Press “ ” button to decrease volume.
+3KRQH/LQH2XW
Setting H.Phone/Line Out Sound Mode
• Using “ ” or “ ” button select Sound Mode.
Pressing “ ” or “ ” button will change the
current sound mode. (e.g.: If the current
sound mode is stereo, it will be stereo or
visa versa).
In case of bilingual broadcast, you can se-
lect original or dubbed language again us-
ing mode menu. So when somebody listens
to the original language from the loudspeak-
ers, somebody else can listen to the dubbed
language from headphone.
To Store the Settings
• Press “OK” button on the remote control to
store the settings directly.
or,
• Using “ ” or “ ” button select Store. Press
“ ”, “ ” or “OK” button to store current
H.Phone/Line Out volume and sound
mode. The stored values will be valid for all
the programmes.
Equalizer
• Using “ ” or “ ” button select Equalizer.
• Press “ ” or “ ” button or directly press
“ OK ” button to enter Equalizer sub-menu.
6RXQG
ENG-1700W-1547UK-17 INCH TFT-WM-17LD4220U.p65 01.12.2004, 14:13 13