English
- 21 -
buttons.
The channel type is set using or buttons.
It enables displaying the channels only with
the selected type.
The channel name is set using or buttons
to display the channel which broadcasts the
programme.
The start time, end time and date are each set
with the numeric buttons on the remote control
in 24-hour format.
The frequency mode determines how often
the receiver operates this event and is set with
the or buttons to be either
Once
,
Daily
, or
Weekly
.
+LQW
,IDQLQYDOLGQXPEHUIRUWKHVWDUWRUHQGWLPHV
RUWKHGDWHLVHQWHUHG³(QWHUHGWLPHLVQRW
YDOLG´PHVVDJHDSSHDUVRQWKHVFUHHQ
TV Setup
You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the
MENU
button to
display the main menu and use
or
buttons to highlight
TV Setup
. Press
OK
button
to display TV Setup menu screen.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
796HWXS
&RPPRQ,QWHUIDFH
You can find detailed information for all menu
items in Analogue TV Menu System section.
Common Interface
Press
M
button to display the main menu and
use the
or
buttons to highlight the
Common Interface
line and press
OK
button.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
796HWXS
&RPPRQ,QWHUIDFH
It is required to subscribe to a pay channel
company to view the pay channels of the Digital
Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the
Television using the following procedure:
1. Switch off the TV and unplug from the mains.
2. Insert the CAM, and then the viewing card to
the slot that is located in the terminal cover at
the left-hand side of the TV (from front view).
The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM
or the TV terminal may be damaged if the CAM
is forcefully inserted.
3. Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
Some CAMs may require the following set up.
Please set the CAM by entering the IDTV menu,
Common Interface then pressing
OK
button.
(CAM set up menu is not displayed when it is
not required.)
To see the viewing contract information:
Enter IDTV; press
M
button, then highlight
Common Interface
and press
OK
button.
When no module is inserted,
No Common
Interface module detected
message
appears on the screen.
Refer to the module instruction manual for
details of the settings.
NOTE
: Insert or remove the CI module only when
the TV is in
STAND-BY
mode or
SWITCHED OFF
.
A01-ENG-1538-1055 UK-17MB21-PANEU IDTV-(WO SVHS-WO PC)-10052174-5011xxxx-rev1.p6526.07.2007, 16:50
21
