4
English
Fig. 3
First Nail
Guide Slot
Nail Guide
Feeder
1
Guide Surface
Feeder
2
䡬
Close the cover after confirming that the nails are
loaded in the magazine.
(2) Load nails in the guide.
䡬
Greip the nail guide and knob with fingers. Then
depress the knob to open the nail guide towards the
left. (See
Fig. 2
)
Fig. 2
䡬
Extend the nail line from the magazine.
When using sheet collated nails
While pressing the linking sheet to the guide surface,
insert the first nail in the row of nails into the nail
outlet. Then insert the second nail between feeder
1
and feeder
2
. Confirm at this time that the nail head
and the upper side linking sheet enter the guiding
groove (see
Fig. 3, 4
).
When using wire collated nails
Insert the first nail into the nail outlet and the second
nail between the two pawls of feeders
1
and
2
so
that the nail head engages the guide slot. (
Fig. 5
and
6
)
Fig. 5
Fig. 6
Wire
Main Nail
Stopper
Sub Nail
Stopper
Nail Guide
Feeder
1
Feeder
2
Guide Surface
Linking
Sheet
Guide Slot
First Nail
Nail Outlet
Fig. 4
Guide Slot
Upper side
linking sheet
Nail Guide
Sub Nail Stopper
Nail Head
Main Nail
Stopper
Fig. 1
Magazine Opening
Cover
First section of the Nails
Nail
Adjust the oiler so that a single drop of oil is supplied
at intervals of 5 to 10 nailing cycles.
(2) It is recommended using the recommended oil (SHELL
TONNA). Other applicable oils are listed. Never mix
two or more types of different oils.
3. Load nails
(1) Load nails in the magazine
䡬
Press the stopper and open the cover.
䡬
Load the nails in the magazine. Insert the beginning
of the nail into the opening of the magazine to facilitate
the following procedures (
Fig. 1
).
Knob
Magazine Opening
Nail Guide
First section
of the Nails
Summary of Contents for NV 38AB2
Page 26: ...25 ...
